Common Faults of CNC Paper Cutting Machine

Date:2023/12/16 12:39:11 Read:42

Common Faults of CNC Paper Cutting Machine


CNC paper cutting machines play a crucial role in the modern printing industry, enhancing both efficiency and quality. However, like any other equipment, they are prone to various faults due to prolonged usage and improper handling. In this article, we will analyze the common faults encountered in CNC paper cutting machines and provide corresponding solutions.
Paper cutting machine

common faults encountered in CNC paper cutting machine


1. Inaccurate Cutting:
The CNC paper cutting machine may experience inaccuracies during the cutting process, which can be attributed to the following reasons:
1. Blade Wear: Prolonged usage leads to blade wear, affecting cutting precision.
2. Blade Misalignment: Loose fixing screws or damaged blade holders can cause blade misalignment, resulting in inaccurate cutting.
3. Improper Blade Adjustment: Incorrect adjustment of the blade can lead to positional deviations during cutting.
Solution:
1. Regularly check the condition of the blades and replace worn-out ones promptly.
2. Inspect and tighten the fixing screws of the blades. Replace damaged blade holders if necessary.
3. Carefully adjust the blade holder to ensure accurate cutting positions.

2. Blade Jamming:
Blade jamming is a common issue in CNC paper cutting machines, which can be caused by the following factors:
1. Loose Paper: Loose or moisture-damaged paper can cause the blade to jam.
2. Blade Wear: Worn-out blades result in insufficient cutting force, leading to jamming.
3. Incorrect Blade Angle: Improper blade angles can also cause blade jamming.
Solution:
1. Ensure the paper is properly aligned and avoid loose or moisture-damaged paper.
2. Regularly check the condition of the blades and replace them when necessary.
3. Carefully adjust the blade angle to ensure smooth cutting.

3. Electrical Circuit Malfunction of Paper Cutting Machine :
Electrical circuit malfunctions can render the paper cutting machine inoperable, and the following factors may contribute to this issue:
1. Power Supply Issues: Unstable power supply or short circuits in the power lines can cause electrical circuit malfunctions.
2. Control Board Failure: Damaged control boards or poor connections can result in electrical circuit malfunctions.
3. Sensor Malfunction: Damaged or improperly adjusted sensors can lead to electrical circuit malfunctions.
Solution:
1. Ensure a stable power supply and avoid power line short circuits.
2. Inspect the connections of the control board, replacing it if damaged.
3. Thoroughly inspect the sensors to ensure they are in good working condition.

Conclusion:
Faults in CNC paper cutting machines are inevitable with prolonged usage. However, by promptly identifying and applying the correct solutions, we can quickly restore the normal functioning of the equipment. We hope that the fault analysis and corresponding solutions provided in this article will be helpful, enabling us to achieve more efficient and successful printing work!


Same Product

WDLSZJ数纸机

WDLSZJ数纸机

WDLSZJ数纸机 1.该款数纸机是我司致力于研发生产智能制造高新产品线中的…


QZYK1700DW 高速自动切纸机

QZYK1700DW 高速自动切纸机

high speed Paper Cutting Machine QZYK170…


QZYK1150DW 液压程控切纸机

QZYK1150DW 液压程控切纸机

液压程控切纸机 QZYK1150DW 液压程控切纸机用于切割各种印刷纸张、纸制品…


QZYK1700DF 触摸屏切纸机

QZYK1700DF 触摸屏切纸机

QZYK1700DF 触摸屏切纸机 Touch screen paper cut…